Roofing Accessories
Insulation/Ventilation
4′, 6′, & 8′ Wide
Typical Roll Weight: 22.3 +/- 0.3lbs, 33.05 +/- 0.45lbs, 43.75 +/- 0.55lbs Typical Rool Length: 125 feet
Prevents water from blowing underneath the ridge cap while allowing the attic to breathe.
Use: used to ensure continuity of seal, continuing of insulation, and continuity of fireproofing at all interrupted waterproofing systems.
The roof vent is designed to fit between the ribs of standing seam roof panels. Three models based on rib height:
Snap-Z 1000 for 1″ Rib Height Snap-Z 1500 for 1.5″ Rib Height Snap-Z 2000 for 2″ Rib Height
The roof vent is designed to fit between the ribs of standing seam roof panels. Three models based on rib height:
Snap-Z 1000 for 1″ Rib Height, Snap-Z 1500 for 1.5″ Rib Height, Snap-Z 2000 for 2″ Rib Height
Prevents water from blowing underneath the ridge cap while allowing the attic to breathe.
Venting Material, die cut to fit panel type and can be used with Ultra Rib, PBR, and 5 Rib.
Watts Removal: Sealants
6″ rolls by 33 1/3′ Seals panels under Hip Caps
1/2″ X 50′ and 3/4″ X 50′ rolls are available. Seals laps and trim to roof seams. Required on slopes less than 3/12.
Die cut to fit panel type. Use with 5 rib and PBR panels.
Expands to 1″ X 1″ and 1.5″ X 2.0″ use along W-Valley.
Sealant exceptional elongation and flexibility.
Flashings
Used to seal around plumbing pipes. Available in temperature ranges from -65 to 250 degrees. Size #3: 1/4″ to 5″, Size #4: 5″ to 6.75″, Size #5: 4 1/4″ to 7 1/2″, Size #7: 6″ to 11″, Size #9: 9″ to 19″.
Used where electric poles penetrate the roof.
Used on metal for scratches, marks, and end cuts, and panel edges on valleys match the metal colors.
Not to be used on panels or trim. Used on roof boots and vents.
Fasteners
Metal to wood #9 X 1″, or 2″ lengths, 1/4″ head, matches panel colors and there are 250 screws per bag.
Metal to wood #9 X 1.5″, or 2″ lengths, 1/4″ Stainless steel cap, head-micro drill tip matches panel color and there are 250 screws per bag.
Lifetime Warranty- #14 X 7/8″ long, 5/16″ head – matches panel color and there are 250 screws per bag.
For side laps and trim, metal to metal – #14 X 7/8″ long, 5/16″ head – matches panel color and there are 250 screws per bag.
Lifetime Warranty- #10 X 1.5″ or 2″ lengths, 5/16″ head- matches panel color and there are 250 screws per bag.
#9 X 3″ lifetime screw, start drive, and used for attaching 1 x 4’s to the roof. 2000 per box.
#12 X 1″ long used for standing seam panels or clips.
1 lb box, flat head, 1-1/4″ long, and used for fastening drip edge.
(For Purlins) Each item is 2 7/8″ in length and comes in 5,000 quantity.
1 1/4″ (2000 per box)
Rivets 1/8″ Stainless and painted stainless rivers- 100 per bag.
Underlayments
2 Square roll 36″ wide x 66.8″ long. Hightemp, 90-day exposure, and a 10-year warranty.
Use: under most primary roofing materials including commercial, or residential meta, etc.
100% Synthetic material, 10 square rolls, 25-year warranty to shed water, 6 months UV resistant.
Roll-Up Doors
Order any size you need there are many colors to choose from and many options can be added. There is a 7-14 day lead time. This is perfect for workshops, barns, and sheds.
Purlins
Used for roof-overs
